
[MKE 가공물성측정서비스 항목 Update] (Polymer Processing Properties)
No |
영문명칭 |
한글명칭 |
Test ID |
Standards |
1 |
Drying for Moisture Sensitive Materials |
수분민감성 재료의 건조 방법 |
AP-xx-01 |
ASTM D1895 |
2 |
Water Absorption |
수분 흡수율 |
AP-xx-02 |
ASTM D570 |
3 |
Ash Content by Muffle Furnace |
잔류 고형물 함량 측정 |
AP-xx-03 |
ASTM D5630 |
4 |
Molecular Weight by GPC |
GPC를 이용한 분자량 측정 |
AP-xx-04 |
- |
5 |
Thermal Oxidative Stability |
산화안정제 안정성 테스트 |
AP-xx-05 |
ASTM D3019 |
6 |
Volumetric Stress Strain Curves |
체적 응력 변위 곡선 |
MP-R-02 |
- |
7 |
Foam Compressibility |
폼의 압축계수 측정 |
MP-xx-01 |
- |
8 |
Solid Density |
고형체밀도 측정 |
P3-D-01 |
ASTM D792 |
9 |
Melt Density |
용융체 밀도 측정 |
P3-D-02 |
ASTM D3835 |
10 |
Bulk Density |
부피 밀도 측정 |
P3-D-03 |
ASTM D1895 |
11 |
PVT (Isothermal Heating) |
등온 시험법에 의한 PVT 측정 |
P3-D-04 |
- |
12 |
High Rate PVT by Hybrid PVT/DSC |
PVT/DSC를 이용한 고속 냉각 PVT측정 |
P3-D-05 |
- |
13 |
Solid State Compressibility (PVT) |
PVT에 의한 고형상 압축계수 측정 |
P3-D-06 |
- |
14 |
Volumetric Expansion Coefficient by PVT |
Thermal Tests |
P3-D-07 |
- |
15 |
High Pressure PVT |
고압 PVT 측정 |
P3-D-08 |
- |
16 |
Bulk Compressibility of Solid Pellets |
압축 겉보기 밀도 측정 |
P3-D-09 |
- |
17 |
Screw Rheometer Rheology (1 Temperature) |
전단 점도 측정 10 to 1,000 [1/sec] |
P3-R-01 |
- |
18 |
Screw Rheometer Rheology (1 Temperature) |
전단 점도 측정 0.1 to 10 [1/sec] |
P3-R-30 |
|
19 |
Thermal stability Test (1 Temperature) |
스크류 레오미터이용 열안정성 시험 |
P3-R-02 |
- |
20 |
Engineering Relaxation Time (1 Temperature) |
스크류 레오미터 이용 겉보기 이완시간 |
P3-R-03 |
- |
21 |
Cogswell Extensional Viscosity |
Cogswell 신장점도 측정 |
P3-R-04 |
- |
22 |
Binding Extensional Viscosity |
Binding 신장점도 측정 |
P3-R-05 |
- |
23 |
No-Flow Temperature |
No-Flow 온도 측정 |
P3-R-06 |
- |
24 |
Thermal Flow Stability |
열흐름 안정성 분석 |
P3-R-07 |
ASTM D6743 |
25 |
Thermal Stability on Viscosity using Screw Rheometer |
점도의 온도 안정성 측정 |
P3-R-08 |
- |
26 |
Melt Strength – Extruded from Capillary rheometer |
모세관 점도계 이용 용융 강도 측정 |
P3-R-09 |
- |
27 |
Melt Strength – Extruded from Single Screw Extruder |
압출기 이용 용융 강도 측정 |
P3-R-10 |
- |
28 |
Die Swell Measurements by Laser Micrometry |
레이저 마이크로미터를 이용한 다이스웰 측정 |
P3-R-11 |
- |
29 |
Static Die Swell/Sag by Laser Micrometry |
레이저 마이크로미터이용 정적 다이스웰/처짐 측정 |
P3-R-12 |
- |
30 |
Slit-Die Rheology (1 Temperature, 1Die) |
압출기를 사용한 전단점도 측정 |
P3-R-13 |
- |
31 |
Melt Flow Rate |
용융 흐름속도 측정 |
P3-R-14 |
ASTM D1238 |
32 |
Generalized Newtonian Model - Isothermal/Carreau Model |
GNF 등온Carreau모델계수결정 |
P3-R-15 |
- |
33 |
Generalized Newtonian Model - Isothermal/Cross Model |
GNF 등온 Cross모델계수 결정 |
P3-R-16 |
- |
34 |
Generalized Newtonian Model - Carreau WLF Model |
GNF CarreauWLF모델계수 결정 |
P3-R-17 |
- |
35 |
Generalized Newtonian Model - Cross WLF Model |
GNF Cross WLF 모델계수 결정 |
P3-R-18 |
- |
36 |
Generalized Newtonian Model - Carreau Arhenius Model |
GNF CarreauArhenius모델계수 |
P3-R-19 |
- |
37 |
Generalized Newtonian Model - Cross Arhenius Model |
GNF Cross Arhenius 모델계수 |
P3-R-20 |
- |
38 |
Generalized Newtonian Model - Klein Viscosity Model |
GNF Klein 점도모델계수결정 |
P3-R-21 |
- |
39 |
Rheological Data Analysis -Linear
Viscoelastic
Test
Rotational Rheometer |
회전형 점도계 데이터해석 |
P3-R-22 |
- |
40 |
Rheological Data Analysis - SAOS, LAOS test |
Dynamic SAOS, LAOS 데이터해석 |
P3-R-23 |
- |
41 |
Relative Viscosity |
상대 점도 측정 |
P3-R-24-E |
ASTM D789 |
42 |
DSC Scan |
DSC 측정 |
P3-R-25-E |
ASTM D3417 |
43 |
Specific Heat |
열용량 측정 |
P3-R-26-E |
ASTM E1269 |
44 |
Capillary Rheology (1 Temperature) |
모세관점도 측정 |
P3-R-27 |
ASTM D3835 ISO 11443 |
45 |
Capillary Rheology With Bagley Correction (1Temperature) |
모세관점도 측정 (Bagley 보정) |
P3-R-28 |
ASTM D3835 ISO 11443 |
46 |
Very High Shear Capillary Rheology (1Temperature) |
모세관점도 측정 (초고속전단속도) |
P3-R-29 |
ASTM D3835 ISO 11443 |
47 |
Dynamic Friction Coefficient - Screw Simulator |
스크류모사기를 이용한 동마찰계수 측정 (1온도,1속도,1압력) |
P3-T-01 |
- |
48 |
Dynamic Stress Coefficient - Screw Simulator |
스크류모사기를 이용한 용융상태 유사 동마찰계수 (1온도,1속도,1압력) |
P3-T-02 |
- |
49 |
Dynamic Melting Flux - Screw Simulator |
스크류모사기를 이용한 용융 속도 측정 (1온도,1속도,1압력) |
P3-T-03 |
- |
50 |
Thermal Conductivity (Melt) |
용융체 열전도도 측정 TLSM |
P3-TP-01 |
ASTM D5930 |
51 |
Thermal Conductivity (Solid) |
고체 열전도도 측정 TLSM |
P3-TP-02 |
ASTM D5930 |
52 |
Thermal Conductivity Scan |
열전도도 온도 스캔 TLSM |
P3-TP-03 |
ASTM D5930 |
53 |
Heat Transfer Coefficient - Heat Flow Method |
열유량법에 의한 열유량 측정 |
P3-TP-04 |
ASTM E1530 |
54 |
Thermal Conductivity (Wounded Carbon Fiber) |
CB의 열전도도 측정 |
P3-TP-05 |
- |
55 |
Thermal Conductivity (Melt) |
용융체 열전도도 측정 T Diff |
P3-TP-06 |
- |
56 |
Thermal Conductivity (Solid) |
고체 열전도도 측정 T Diff |
P3-TP-07 |
- |
57 |
Thermal Conductivity Scan |
열전도도 온도 스캔 T Diff |
P3-TP-08 |
- |
58 |
Relaxation Time By Screw Rheometer |
스크류레오미터를 이용한 완화시간 측정 |
P3-T-31 |
- |
59 |
Melt
Strength by Temperature sweep – Extruded |
압출기를 이용한 용융 강도 온도 스캔 측정 |
P3-R-32 |
- |
60 |
Extrusion Capillary Rheology (1 Temperature, 1Die) |
압출기를 이용한 전단점도 측정 |
P3-R-33 |
- |
- mke testing service list 60_out.pdf (231.2KB) (1)




번호 | 제목 | 글쓴이 | 조회 | 날짜 |
---|---|---|---|---|
![]() |
MKE 기술서비스 활용안내-update[연구기반활용사업 바우처 사용가능]
![]() ![]() |
mke | 326 | 2020.07.09 15:50 |
![]() |
FEAR Measurement; MKE 고분자물성측정서비스!!!
![]() ![]() |
mke | 1042 | 2019.03.20 11:40 |
>> |
[MKE 가공물성측정서비스 항목 Update] (Polymer Proce
![]() |
mke | 1689 | 2018.02.06 18:54 |
![]() |
[MKE 가공물성 측정서비스 신청 안내] - 2019. 8. updat | mke | 2480 | 2015.11.27 14:52 |
1 |
[MKE Polymer Solution] - 고분자 가공분야 종합솔루션
![]() ![]() |
mke | 2403 | 2015.11.27 12:38 |